Standard Olive Slitting Machine

The machine is made of 304 stainless steel for contact and non-contact parts, all welds are polished and treated

The machine consists of a funnel open from the top in the form of a rectangle, and its input is divided into two parts, one for crushing olives, and the other for hatching olives
The bottom of the funnel is equipped with two cylinders divided into two parts. The first part is equipped with blades stacked together through patches, and the second part is grooved in the form of a network of squares in order to increase the contact surfaces with the olive kernels.
The machine is equipped with a gutter that is positioned at an angle to facilitate the process of dropping the olives that have been crushed or hatched into the required container.
The machine is equipped with an electric motor.
The machine is equipped with a caliber in order to adjust the distance between the two cylinders, according to the size of the olive.

Capacity basin (according to the user’s desire)

The manufacture of this unit is in AISI 304 stainless steel as well as the cutting blades.

Featuring 39 cutting blades the olives are slit in 3 or 4 places depending on the fall down of the olive in this type of machine.

machine brochure